WETSUIT REPAIR GLUE - NEOPRENE SEALANT

$7.50
In Stock SKU: GLUWET
Description

FREE SHIPPING!

 

 Artflex wetsuit sealant is ideal for repairing rips, holes, splits, leaks and tears in wetsuits, while remaining very strong and    flexible when fully cured. Great way to get a little more life from your worn wetsuits. This 30 ml repair will be enough glue to fix several holes or rips.

 

 Directions: Clean the surface around damaged area with soap and water.. Apply liquid seal directly to the area, allowing an extra 5mm around the damaged area. Keep flat and allow too cure. Liquid seal is touch dry in 2-4 hours. Allow 10-12 hours for full cure.

 

Holes/rips: Cover the back of hole/rip with sticky tape or paper. Apply liquid seal on the other side, covering the tape and overlapping the edge of the hole/rip by 10mm. Removing the tape after 12 hours will leave will leave a flush service on the back side. Apply extra coats if needed after 2 hours                                                '

 

On completion: Squeeze contents right to the top of the tube and cap, leaving no air under the cap. Roll up the tube.

 

Keep in a cool dry place away from incompatible materials, direct sunlight and sources of ignition.  WARNING highly inflammable. Harmful by inhalation.  Keep away from sources of ignition. Avoid contact with eyes. After contact with skin, wash immediately with plenty of water.

 

 

 




Reviews


Be The First To Review This Product!

Help other Sanctum Surf users shop smarter by writing reviews for products you have purchased.

Write a product reviews